MS3181G
REQUIREMENTS:
Dimensions and configuration: See figure 1.
The chain or rope shall rotate freely on the fastener. Materials:
a. Cover - aluminum alloy.
b. Cover, bayonet pins - stainless steel, passivated.
c. |
Chain |
- stainless steel, passivated in accordance with RR-C-271, type II, |
class 3. |
||
d. |
Disk (gasket) |
- silicone elastomer. |
e. |
Fasteners |
- stainless steel, passivated. |
f. |
Ring |
- stainless steel, passivated, .030 inches (0.76 mm) maximum |
thickness. |
||
g. |
Rope |
- 7 strand stainless steel, passivated. |
Finish Designators (class E is superseded by class L):
A - series 2, hard anodic, non-conductive in accordance with MIL-A-8625, type III, .0008 inch
(0.020 mm) minimum thickness.
L - series 2, electroless nickel, conductive, in accordance with MIL-DTL-26482.
D - series 1 and 2, pure electrodeposited aluminum, conductive, in accordance with
MIL-DTL-26482.
T - series 1 and 2, nickel fluorocarbon polymer, conductive, in accordance with
MIL-DTL-26482.
W - series 1 and 2, cadmium, conductive (500 hr dynamic salt spray in accordance with
MIL-DTL-26482.
K - series 1 and 2, zinc-nickel, conductive, in accordance with MIL-DTL-26482.
QUALIFICATION: Qualification and requalification requirements shall be in accordance with
MIL-DTL-26482, series 1 and 2 connectors.
Connector mating: This protective cover mates with all MIL-DTL-26482, series 1 and 2 connector receptacles.
Intermateability dimensions shall be in accordance with MIL-DTL-26482.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business