MS34778
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table I.
Connector mating: This connector mates with MS3475 and MS3476. For insert arrangement: See MIL-STD-1669.
Contact SAE-AS39029/32-XX-XX must be used for wire terminations. Shell material: Cold rolled steel, in accordance with ASTM-A108.
Shell finish: .00001 inch (0.254 µm) minimum tin in accordance with ASTM-8545 and ASTM-8339, over nickel pin accordance with SAE-AMS-QQ-N-290.
Insertion/removal tool MIL-I-81969/16-XX to be used with this connector.
Maximum wire diameter permissible: .074 inch (1.88 mm) for size 20 contact, .103 inch (2.62) for size
16 contact.
Intermateability dimensions shall be in accordance with MIL-DTL-26482. Part or Identifying Number (PIN) example:
MS3477 N 16 D 26 P W MS number
Class
Shell size
Termination type & shell material
Insert arrangement
Contact style
Insert position
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-26482, this document references the following: MS3475
MS3476
MIL-STD-1669
ASME Y14.5M ASTM-A108
ASTM-8339
ASTM-8545
SAE-AMS-QQ-N-290
SAE-AS39029/22
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business