MS90561G
REQUIREMENTS:
Design and construction: See figure 1. PIN example: MS90561-X (see figure 1).
The permeability requirement of MIL-DTL-22992 is not required. Qualification:
Visual and mechanical examination. Salt spray (corrosion).
Tensile.
Water immersion.
Group A sampling inspection. 100% inspection is not applicable, sampling inspection shall be specified in table I.
TABLE I. Group A sampling plan.
Lot size |
Sampling size |
1 to 13 14 to 150 151 to 280 281 to 500 501 to 1,200 1,201 to 3.200 |
100 percent 13 units 20 units 29 units 34 units 42 units |
Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
Referenced documents. This document references MIL-DTL-22992.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business