INCH-POUND
FEDERAL SPECIFICATION SHEET
W-C-596/46C
19 October 2001
SUPERSEDING W-C-596/46B
4 September 1981
CONNECTOR, RECEPTACLE, ELECTRICAL, SPECIFIC PURPOSE, SINGLE, GENERAL GRADE, LOCKING, 3 POLE, 3 WIRE, 20 AMPERES, 125/250 VOLTS, 50/60 HERTZ
INACTIVE FOR NEW DESIGN USE W-C-596/120
The General Services Administration has authorized the use of this federal specification sheet by all federal agencies.
The complete requirements for procuring the connectors described herein shall consist of this document and the latest issue of Specification W-C-596/GEN.
TO INSURE ALIGNMENT OF CORD OUTLET OF ANGLE PLUGS, HORIZONTAL LINE MUST BE USED AS MOUNTING CENTER LINE OF RECEPTACLE.
Inches |
mm |
.005 |
0.13 |
.010 |
0.25 |
.080 |
2.03 |
.093 |
2.36 |
.100 |
2.54 |
.155 |
3.94 |
.187 |
4.75 |
.265 |
6.73 |
.285 |
7.24 |
.312 |
7.92 |
.437 |
11.10 |
1.125 |
28.58 |
1.390 |
35.31 |
1.750 |
44.45 |
2.000 |
50.80 |
2.562 |
65.07 |
2.875 |
73.03 |
NOTES:
1. For mounting dimensions see W-C-596/GEN, configuration A, (single receptacles with break-off ears).
2. Dimensions are in inches.
3. Metric equivalents are given for general information only.
4. Unless otherwise specified, tolerance is ±.005 on all decimals and ±.5° on angles.
5. Undimensioned pictorials are for reference purposes only.
FIGURE 1. Configuration and dimensions.
AMSC N/A 1 of 2 FSC 5935
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business