MIL-DTL-12883/50B
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.200
0.81
.032
0.03
20.32
.800
5.08
.001
.312
1.19
.047
0.05
1.006
7.92
25.55
.002
.320
1.52
.060
0.08
1.305
8.13
.003
33.15
.3530
1.57
.062
0.13
1.437
8.97
.005
36.50
2.26
.069
0.41
1.645
.016
9.06
.3565
41.78
4.34
.171
0.76
.030
2.640
9.40
.370
67.06
4.55
.179
0.79
.031
10.16
.400
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ± .010 inch (0.25 mm).
4. Terminal markings shall be of a contrasting color to the socket surface and shall appear on both the
bottom and top surface per the applicable specification.
5. Color code, top surface of socket per table I.
FIGURE 1. Dimensions and configuration Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
Weight: .045 pound (20.41 grams) maximum.
Material:
Body: Polyetherimide.
Bracket: 17-7 ph cres passivated in accordance with SAE AMS QQ-P-35.
Plating: Sulfamate nickel in accordance with SAE-AMS-QQ-N-290, 100 microinches minimum.
Grommet: Silicone rubber.
Terminal/ground pins:
Use M39029/57-354 for 22 gage (.031) terminal/ground pins.
Use M39029/57-358 for 16 gage (.062) terminal pins.
Note: Neither contact is furnished with the socket module.
Minimum holding force: 3 lbs (13.34 Newton) when assembled to track (MIL-DTL-12883/49).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business