MIL-DTL-12883/54A
TABLE V. Weight.
Maximum weight
Part
designations
M12883/54
Grams
Pounds
-01 and 02
.132
60
-03 and 04
.154
70
PIN: The PIN shall be marked on the mounting track as shown in the example (see figure 1). The PIN
shall consist of the basic number of this specification sheet and the dash number.
Example:
*
M12883/54
-001
S
Basic document number
Dash number
Modifier S shall be used in the
PIN only when ordering sockets
Furnished with corrosion resistant
Steel hardware with no finish.
*For acquisition of these sockets, parts identified with an "S" modifier shall be corrosion resisting steel
(CRS) and parts without an "S" modifier shall be cadmium chromate finish. No mixing of hardware
types shall be permitted.
Ordering data: Sockets without contacts may be ordered when so indicated in the ordering data (see
MIL-DTL-12883). This applies only to original equipment manufacturers (OEM's) and subcontractors.
All direct shipments to the government shall include all applicable contacts and mounting hardware.
The PIN to be marked on the socket shall be as shown in the PIN example (see figure 1 and table I).
The Government PIN, specified in table VI, supersedes the following commercial PINs.
TABLE VI. Supersession and cross reference.
Active
Superseded number
Government
PIN
CAGE
58982
M12883/54-01
RSE116627
M12883/54-02
RSE116631
M12883/54-03
RSE116629
M12883/54-04
RSE116635
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business