MIL-DTL-21097/17E
REQUIREMENTS
Dimensions and configurations: See figure 1.
Use: With connectors in accordance with MIL-DTL-21097/13.
Individual contact engagement and separation forces: Dimensions of the gage shall be in accordance
with MIL-DTL-21097/19.
Finish: Gold plating in accordance with ASTM B488, type II, code C, class 1.27, over nickel plating in
accordance with SAE-AMS-QQ-N-290, class 2, 30 to 150 microinches.
Contacts are qualified when connectors in accordance with MIL-DTL-21097/13 are qualified.
Part or Identifying Number (PIN): M21097/17-01.
Changes from previous issue. Marginal notations are not used in this revision to identify changes
with respect to the previous issue due to the extent of the changes.
Referenced documents. In addition to MIL-DTL-21097, this document references the following:
MIL-DTL-21097/13
MIL-DTL-21097/19
ASTM B488
SAE-AMS-QQ-N-290
CONCLUDING MATERIALS
Custodians:
Preparing activity:
Army CR
DLA - CC
Navy EC
Air Force 11
(Project 5935-4505-008)
DLA - CC
Review activities:
Army AR, AT, AV, CR4, MI
Navy AS, MC, OS
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database athttps://assist.daps.dla.mil.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business