MIL-DTL-24308/31
REQUIREMENTS:
Dimensions and configurations:
Insert arrangements shall be in accordance with figure 1.
Shell configuration shall be in accordance with figure 2.
Termination and layout arrangement figures 3 and 4
Mounting configurations shall be in accordance with figure 5.
Contact retention: Not applicable.
Materials and finishes:
Mounting brackets half hard brass, UNS-C26000 in accordance with ASTM B36/B36M, zinc plate
(0.000050-0.000130 inches) with dichromate seal in accordance with ASTM B633 Type II.
Spacer with push fastener, phosphor bronze, UNS-C54400 in accordance with
ASTM B139/B139M.
Finish: Gold in accordance with MIL-DTL-45204, type II, grade C, class 1 or equivalent over
copper in accordance with SAE AMS 2418.
Push fastener with mounting brackets, beryllium copper, UNS-C17300 in accordance with
ASTM B196/B196M.
Finish: Gold in accordance with MIL-DTL-45204, type II, grade C, class 1 or equivalent over
copper in accordance with SAE AMS 2418.
Electrical:
Size 20 signal contacts:
Current rating:
7.5 amps nominal
Initial contact resistance:
.008 ohms maximum
Proof voltage:
1000 V r.m.s.
Power contacts:
.078 dia:
10 amps
.125 dia:
40 amps
Initial contact resistance:
.0005 ohms maximum
Shielded contacts:
Nominal impedance:50 ohms
Insertion loss:
-0.46 dB at 1 GHz
-1.5 dB at 2 GHz
VSWR:
1.15 average at 1 GHz
1.56 average at 2 GHz
Proof voltage:
1000 V r.m.s
Initial contact resistance:
.008 ohms maximum
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business