MIL-DTL-24308/39
REQUIREMENTS:
Dimensions and configurations:
Insert arrangements shall be in accordance with figure 1.
Shell configuration shall be in accordance with figure 2.
Termination and layout arrangement figures 3.
Mounting configurations shall be in accordance with figure 4.
Materials and finishes:
Mounting brackets half hard brass, UNS-C26000 in accordance with ASTM B36/B36M, zinc plate
(0.000050-0.000130 inches) with dichromate seal in accordance with ASTM B633 Type II.
Spacer with push fastener, phosphor bronze, UNS-C54400 in accordance with
ASTM B139/B139M.
Finish: Gold in accordance with MIL-DTL-45204, type II, grade C, class 1 or equivalent over
copper in accordance with SAE AMS 2418.
Push fastener with mounting brackets, beryllium copper, UNS-C17300 in accordance with
ASTM B196/B196M.
Finish: Gold in accordance with MIL-DTL-45204, type II, grade C, class 1 or equivalent over
copper in accordance with SAE AMS 2418.
Electrical:
Size 20 signal contacts:
Current rating:
7.5 amps nominal
Initial contact resistance:
.008 ohms maximum
Proof voltage:
1000 V r.m.s.
Power contacts:
.078 dia:
10 amps
.125 dia:
40 amps
Initial contact resistance:
.0005 ohms maximum
Shielded contacts:
Nominal impedance:50 ohms
Insertion loss:
-0.46 dB at 1 GHz
-1.5 dB at 2 GHz
VSWR:
1.15 average at 1 GHz
1.56 average at 2 GHz
Proof voltage:
1000 V r.m.s
Initial contact resistance:
.008 ohms maximum
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business