MIL-DTL-24308/6R
NOTES:
1.
Dimensions are in inches.
2.
Metric equivalents are given for information only.
3.
Insulator may project .375 (9.53mm) maximum.
4.
Wire insulation .072 (1.83mm) maximum for arrangements, (see MIL-DTL-24308, Appendix A), A-1-1, A-2-1,
A-3-1, A-4-1, and A-5-1. Wire insulation .054 (1.37mm) maximum for arrangements, (see MIL-DTL-24308,
Appendix A), A-1-2, A-2-2, A-3-2, A-4-2, A-5-2, and A-6-1.
5. To accommodate a .040 (1.02mm) diameter pin for arrangements, (see MIL-DTL-24308, Appendix A), A-1-1,
A-2-1, A-3-1, A-4-1, and A-5-1. To accommodate a .030 (0.76mm) diameter pin for arrangements,
(see MIL-DTL-24308, Appendix A), A-1-2, A-2-2, A-3-2, A-4-2, A-5-2, and A-6-1.
6. Use .041/.039 (1.04/0.99mm) diameter pin for arrangements, (see MIL-DTL-24308, Appendix A), A-1.1, A-2.1,
A-3.1, A-4.1, and A-5.1. Use .0305/.0295 (0.77/0.75mm) diameter pin for arrangements,
(see MIL-DTL-24308, Appendix A), A-1-2, A-2-2, A-3-2, A-4-2, A-5-2, and A-6-1.
7. Patent notice. The government has a royalty free license under the U.S. Patents listed below for the benefit of
manufacturers of the items disclosed and described herein, either for the government of for use in equipment
delivered to the government.
2790153 expires April 23, 1974
3110093 expires November 12, 1980
3158424 expires November 24, 1981
8. Copyright notice. All information disclosed in this military specification sheet which is or may be copyrighted
by ITT Cannon Electric is reproduced herein with the express permission of the copyright owner.
9. Indentation on the ends of the termination side of the shell, for the purpose of securing the insulator in the
shell, is permitted. This may result in the "F" dimension being undersized in these areas. However the "F"
dimension shall be maintained for the remainder of the connector.
10. See table II for shell supersession data.
11. Details B and C are inactive for new design, use detail D.
Inches
mm
.004
0.10
.005
0.13
.008
0.20
.010
0.25
.031
0.79
.040
1.02
.041
1.04
.062
1.57
.070
1.78
.086
2.18
.092
2.34
.097
2.46
.103
2.62
.115
2.92
.120
3.05
.125
3.18
.129
3.28
.143
3.63
.375
9.53
FIGURE 1. Shell, receptacle, crimp type - Continued.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business