MIL-DTL-25955A
1.2.5 Insert arrangements. As specified in the applicable detail documents.
1.3 Part or Identifying Number (PIN). The PIN is as follows:
M
16
10
V
MS24234
MS number
Style
Shell size
Insert arrangement
Alternate position
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-C-17/94
-
Cable, Radio Frequency Flexible, Coaxial 75 Ohms, M17/94 RGG179
MIL-W-5086
-
Wire, Electrical, 600-Volt, Copper Aircraft
MIL-S-7742
-
Screw Threads Standard, Optimum Selected Series
MIL-PRF-5606 -
Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance
MIL-PRF-7808 -
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base
MIL-PRF-23827 -
Grease, Aircraft and Instrument, Gear and Actuator Screw, NATO Code
Number G354
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
-
Identification Marking of U.S. Military Property
MIL-STD-202
-
Electronic and Electrical Component Parts
MIL-STD-810
-
Environmental Engineering Considerations and Laboratory Tests
MIL-STD-889
-
Dissimilar Metals
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or
https://www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business