MIL-DTL-26500G
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202
-
Test Methods for Electronic and Electrical Component Parts.
MIL-STD-889
-
Dissimilar Metals.
MIL-STD-1554
-
Insert Arrangements for MIL-DTL-83723 Series III and
MIL-DTL- 26500 Environment Resisting, Circular, Electrical Connectors.
MS24265
-
Connector, Receptacle, Electrical, Single Hole Mount Miniature, Classes
E, F, G, H and R (Inactive for new design).
Wire, Electrical, Silicone-Insulated, Copper, 600 Volt, 200°C Polyester
MS25471
-
Jacket.
MS27034
-
Connector, Receptacle, Electrical, Pin Insert, Cylindrical, Miniature,
Hermetic, Solder Mount.
MS27291
-
Support, Cable, Electrical Connector.
MS27488
-
Plug, End Seal, Electrical Connector.
MS27558
-
Support, Cable, Right Angle, Closed.
MS27559
-
Support, Cable, Right Angle.
MS27657
-
Short Support, Cable, Electrical Connector,
(For Class E and K Connectors).
MS27658
-
Long Support, Cable, Electrical Connector (For Class E and K
Connectors)
MS27659
-
90 Degree Support, Cable, Electrical Connector (For Class E and K
Connectors)
(See supplement 1 for list of specification sheets.)
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-
5094.)
2.3 Non-Government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are cited in the
solicitation or contract (see 6.2).
ASTM INTERNATIONAL
ASTM-B211
-
Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and
Tubes.
ASTM-A342/A342M
-
Standard Test Methods for Permeability of Feebly Magnetic Materials.
ASTM-A967
-
Chemical Passivation Treatments for Stainless Steel Parts.
(Copies of these documents are available online at https://www.astm.org or ASTM International, P.O.
Box C700, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
ELECTRONIC COMPONENTS ASSOCIATION (ECA)
EIA-364
-
Electrical Connector/Socket Test Procedures including Environmental
Classifications.
EIA-364-20
-
Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and
Coaxial Contacts.
EIA-364-21
-
Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and
Coaxial Contacts.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business