MIL-DTL-2726/24C
REQUIREMENTS
Dimensions and configurations: See figures 1, 2 and 3.
Effectiveness of enclosure: Submersible (15-foot) in accordance with MIL-STD-108 when coupled
with mating receptacle.
Strain relief: 30-pounds.
Material: Body and cap brass.
Contact copper or copper alloy, minimum of Rockwell 80F.
Ground contact brass.
Contact insulation in accordance with ASTM-D5948 type GPI-100.
Stuffing tube: MIL-S-19622/3, PIN M19622/3-004.
Packing assembly: MIL-S-19622/19, PIN M19622/19-0005 is inactive for new design and is no longer
used, except for replacement purposes. For future use should be made under
ASTM-F1836M.
Mating receptacles: MIL-DTL-2726/44, PIN M2726/44-001 and MIL-DTL-2726/25,
PIN M2726/25-001.
Test cable: MIL-DTL-24643 and MIL-DTL-24643/3.
Design: Binding head screws may be used. Individual pathways through the contact insulation shall
be provided to each contact of ample size to accept the insulated conductors.
Electrical rating: 25-ampere, 500-volt, alternating current, 60-hertz.
PIN: M2726/24-001.
Verification
Verification shall be as specified in MIL-DTL-2726 and table I herein. The first article and
conformance inspections shall consist of the inspections as specified in table I, in the order shown.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business