MIL-DTL-2726/32B
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Contact resistance: When tested as specified in accordance with MIL-DTL-2726, the voltage
drop shall not exceed 10 millivolts. Measured between the connection
stud of the receptacle.
Uncoupling force: Minimum of 5 pounds.
H.I. shock: Disengagement of the test plug from the receptacle under H.I. shock shall
not be considered as a failure.
Contact hardness: Minimum of Rockwell 76B.
Mating plug: MIL-DTL-2726/30, Part or Identifying Number (PIN) M2726/30-001 (not furnished).
Design: Receptacle shall be designed to fit the following: Panel hole .500 inch diameter
Panel thickness .125 inch to .250 inch.
Material: Body - rubber, in accordance with ASTM D 2000 M2AC 710 A13E034 or
plastic, in accordance with type MAI-60 of ASTM-D5948.
PIN: M2726/32-001 (black) symbol 775.1, M2726/32-002 (red) symbol 775.2.
Electrical rating: 10-ampere, 125-volt.
Contact finish: Silver plate.
.
Receptacles body and spacer tube shall be colored.
QUALITY ASSURANCE:
Quality assurance shall be as specified in MIL-DTL-2726 and table I herein. The first article and quality
conformance inspections shall consist of the inspections as specified in table I, in the order shown.
2