MIL-DTL-2726/50D
Inches
mm
.063
1.59
.094
2.38
.125
3.18
.156
3.97
.375
9.53
.406
10.31
.415
10.54
.437
11.10
.438
11.13
.440
11.18
.470
11.94
.500
12.70
.504
12.80
.520
13.21
.550
13.97
.560
14.22
.625
15.88
.669
16.99
.679
17.25
.681
17.30
.750
19.05
.812
20.62
1.000
25.40
1.002
25.45
1.010
25.65
1.250
31.75
1.266
32.15
1.625
41.28
Packing washers .063 thick
Packing assembly
Packing bushing
part no.
"A" diameter
Seating
Slip (2)
M2726/50-004-1
0.415
.669 X .440
.750 X .560
M2726/50-004-2
0.470
.669 X .520
M2726/50-004-3
0.550
.669 X .560
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ± .016 inch (0.41 mm). Tolerances for the packing bushing
and packing washers in the table above are ± .005 inch.
3. Angular tolerance is ± 0.5°.
4. Metric equivalents are given for general information only.
5. Instruction sheet: An instruction sheet, (on paper 4-3/4 by 4-3/4 inches) with the information shown
on figure 4 shall be furnished with each plug.
FIGURE 3. Plug body assembly - Continued.
5