MIL-DTL-27434/30A
Dimensions and configuration: In accordance with figure 1 and the following drawings:
SAE-AS28775 Packing, Preformed, Hydraulic, +275 DEG. F. ("O" RING)
REA10042 Ring
REB10056 Insulator
REA10284 Contact
REA10285 Flange
REA10288 Ball Bearing
REA10289 Sleeve
REA10293 Spring
REB10424 Insulator
REB10437 Body
REA10449 Bushing
REB10635 Contact
REB10914 - Body
Mating characteristics: Series C interface shall be in accordance with MIL-STD-348. Series QDS
interface shall be in accordance with figure 2.
Gage tests for contacts: The specified contact shall meet the gage tests for contacts specified in
MIL-A-27434. The outer contact shall meet the gage test as specified in MIL-A-27434 prior to
assembly into the connector adapter (QDS only).
Spring finger contact members shall make contact within .0312 inch of their tip ends, with a ring
having an inside diameter of .420 inch minimum. All contact members shall then enter a ring
having as inside diameter of .428 inch maximum when a pressure of not more than 1 pound is
applied.
Part or Identifying Number (PIN): UG-1142/U
Supersession: This document supersedes Navy drawing REB49319
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army CR
DLA - CC
Navy EC
Air Force 11
(Project 5935-4520-002)
DLA CC
Review activities:
Air Force 99
Navy - SH
3