MIL-DTL-27434/32B
Dimensions and configuration: In accordance with Figure 1 and the following drawings:
SAE-AS28775 Packing, Preformed, Hydraulic, +275 DEG. F. ("O" RING)
REB10003 Bushing
REB10022 Insulator
REB10042 Ring
REA10284 Contact
REA10285 Flange
REA10288 Ball Bearing
REA10289 Sleeve
REA10293 Spring
REB10424 Insulator
REB10635 Contact
REB10914 Body
REB10916 Body
Mating characteristics: Series N interface shall be in accordance with MIL-STD-348. Series QDS
interface shall be in accordance with figure 2.
Gage tests for contacts: The specified contact shall meet the gage tests for contacts specified in
MIL-A-27434. The outer contact shall meet the gage test as specified in MIL-A-27434 prior to
assembly into the connector adapter (QDS only).
Spring finger contact members shall make contact within .0312 inch of their tip ends, with a ring
having an inside diameter of .420 inch minimum. All contact members shall then enter a ring
having as inside diameter of .428 inch maximum when a pressure of not more than 1 pound is
applied.
Part or Identifying Number (PIN): UG-1144/U
Supersession: This document supersedes Navy drawing REB49321
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Army CR
DLA - CC
Navy EC
Air Force 11
(Project 5935-4520-003)
DLA CC
Review activities:
Air Force 99
Navy - SH
3