MIL-DTL-28731F
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA-364
-
Electrical Connector/Socket Test Procedures Including Environmental
Classifications
EIA-364-06
-
Contact Resistance Test Procedure for Electrical Connectors
EIA-364-08
-
Crimp Tensile Strength Test Procedure for Electrical Connectors
EIA-364-13
-
Mating and Unmating Forces Test Procedure for Electrical Connectors
EIA-364-20
-
Withstanding Voltage Test Procedures for Electrical Connectors,
Sockets and Coaxial Contacts
EIA-364-21
-
Insulation Resistance Test Procedure for Electrical Connectors,
Sockets, and Coaxial Contacts
EIA-364-23
-
Low Level Contact Resistance Test Procedure for Electrical
Connectors and Sockets
EIA-364-26
-
Salt Spray Test Procedure for Electrical Connectors, Contacts and
Sockets
EIA-364-27
-
Mechanical Shock (Specified Pulse) Test Procedure for Electrical
Connectors
EIA-364-28
-
Vibration Test Procedure for Electrical Connectors and Sockets
EIA-364-29
-
Contact Retention Test Procedure for Electrical Connectors
EIA-364-31
-
Humidity Test Procedure for Electrical Connectors and Sockets
EIA-364-32
-
Thermal Shock (Temperature Cycling) Test Procedure for Connectors
and Sockets
(Copies of these documents are available online at https://www.eia.org or from the Electronic Industries
Alliance, Technology Strategy & Standards Department, 2500 Wilson Boulevard, Arlington, VA 22201.)
SAE INTERNATIONAL
SAE-AMS-P-81728 -
Plating, Tin Lead (Electrodeposited).
SAE-AMS-QQ-N-290-
Nickel Plating (Electrodeposited).
SAE-AMS-QQ-P-416 -
Plating, Cadmium (Electrodeposited).
SAE-AMS-STD-66 -
Steel: Chemical Composition and Hardenability.
SAE-AS22759/9
-
Wire, Electric, Fluoropolymer-Insulated, Extruded TFE, Silver-Coated
Copper Conductor, 1000-Volt.
(Copies of these documents are available online at https://www.sae.org or from the SAE World
Headquarters, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.3 Order of precedence. In the event of conflict between the text of this document and the references
cited herein (except for related specification sheets), the text of this document takes precedence. Nothing
in this document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be as specified herein and in
accordance with the applicable specification sheet. In the event of any conflict between the requirements
of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in
accordance with 4.5.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business