MIL-DTL-28748/7F
Inches
mm
Inches
mm
Inches
mm
.004
0.10
.145
3.68
.625
15.88
.005
0.13
.146
3.71
.752
19.10
.008
0.20
.147
3.73
.78
19.81
.010
0.25
.195
4.95
.814
20.68
.020
0.5
.21
5.3
.88
22.4
.0405
1.029
.244
6.20
.987
25.07
.045
1.14
.250
6.35
1.000
25.40
.047
1.19
.270
6.86
1.032
26.21
.081
2.06
.28
7.1
1.06
26.9
.090
2.29
.282
7.16
1.128
28.65
.105
2.67
.350
8.89
1.25
31.8
.109
2.77
.376
9.55
1.281
32.54
.125
3.18
.39
9.9
1.408
35.76
.140
3.56
.562
19.27
1.50
38.1
.14
3.6
.564
14.33
1.62
41.1
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ± .02 inch (0.5 mm) for two place decimals and ± .015
inch (0.38 mm) for three place decimals.
4. Tolerance between any two adjacent contact centers shall be ± .004 inch (0.10 mm). Tolerance
between any two contact centers, other than adjacent contacts, shall be ± .006 inch (0.15 mm).
5. Contact letter identification may be located on either side of the contact hole.
6. Inserts shall be used with guide pin assemblies or jackscrew assemblies.
7. Insert material: Shall be in accordance with MIL-DTL-28748.
FIGURE 3. Insert arrangements Continued.
13
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business