MIL-DTL-28840/19E
L
Q
Z
Max
Backshell
Connector
Assembly
O.D.
max
max
max
assembly
plug
Shell size
Part or
over
designator
Identifying
rear
(PIN)
(PIN)
Number (PIN)
clamps
(see note 3)
(see note 6)
(see note 6)
(see note 6)
3.125 1.028 .928
.832
A (11)
M28840/19*A*** M28840/16*A***
M28840/3A*
(79.38) (26.11) (23.57)
(21.13)
3.125 1.141 .928
.832
B (13)
M28840/19*B*** M28840/16*B***
M28840/3B*
(79.38) (28.98) (23.57)
(21.13)
3.250 1.263 .991
.989
C (15)
M28840/19*C*** M28840/16*C***
M28840/3C*
(82.55) (32.08) (25.17)
(25.12)
3.312 1.387 1.110
1.046
D (17)
M28840/19*D*** M28840/16*D***
M28840/3D*
(84.12) (35.23) (28.19)
(26.57)
3.375 1.513 1.172
1.319
E (19)
M28840/19*E*** M28840/16*E***
M28840/3E*
(85.73) (38.43) (29.77)
(33.50)
3.438 1.703 1.235
1.557
F (23)
M28840/19*F*** M28840/16*F***
M28840/3F*
(87.33) (43.26) (31.37)
(39.55)
3.500 1.825 1.297
1.653
G (25)
M28840/19*G*** M28840/16*G***
M28840/3G*
(88.90) (46.36) (32.94)
(41.99)
3.750 2.143 1.543
1.819
H (29)
M28840/19*H*** M28840/16*H***
M28840/3H*
(95.25) (54.43) (39.19)
(46.20)
3.875 2.329 1.668
2.020
J (33)
M28840/19*J*** M28840/16*J***
M28840/3J*
(98.43) (59.16) (42.37)
(51.31)
NOTES:
1.
Dimensions are in inches.
2.
Metric equivalents are given for information only.
3.
Shell sizes are provided within parentheses for information and are not a part of the designator.
4.
Dimensions apply after plating.
5.
Normal mating key position shown. Alternate key positions in accordance with MIL-DTL-28840.
6.
Assembly shall be made of a connector and backshell of the same material.
FIGURE 1. Dimensions and configuration Continued.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business