MIL-DTL-3643B
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).
FEDERAL SPECIFICATIONS
L-P-516
-
Plastic Sheet and Rod, Thermosetting, Cast
O-F-499
-
Flux, Brazing, (Silver Brazing Filler Metal, Low Melting Point).
QQ-B-654
-
Brazing Alloys, Silver.
QQ-L-201
-
Lead Sheet.
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services.
COMMERCIAL ITEM DESCRIPTIONS
A-A-59588
-
Rubber, Silicone.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-130
-
Identification Marking of U. S. Military Property.
MIL-STD-202
-
Test Methods for Electronic and Electrical Component Parts.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
www.dodssp.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM INTERNATIONAL
ASTM A108
-
Steel Bars, Carbon, Cold-Finished, Standard Quality.
ASTM B16
-
Rod, Brass, Free-Cutting, Bar and Shapes for Use in Screw Machines.
ASTM B36
-
Brass Plate, Sheet, Strip and Rolled Bar.
ASTM B121
-
Leaded Brass Plate, Sheet, Strip and Rolled Bar.
ASTM B124
-
Copper and Copper Alloy Forging Rod, Bar and Shapes.
ASTM B139
-
Phosphor Bronze Rod, Bar and Shapes.
ASTM B194
-
Copper Beryllium Alloy Plate, Sheet, Strip and Rolled Bar.
ASTM B196
-
Copper Beryllium Alloy Rod and Bar.
ASTM B197
-
Copper Beryllium Alloy Wire.
ASTM B700
-
Electrodeposited Coatings of Silver for Engineering Uses.
ASTM D1710
-
Tubing, Extruded and Compression Molded, Polytetrafluoroethylene (PTFE)
Rod and Heavy Walled.
(Applications for copies should be addressed to the ASTM International, P.O. Box C700, 100 Barr
Harbor Dr., West Conshohocken, PA 19428-2959.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business