MIL-DTL-3655/14B
Insertion force test:
Steel test pin diameter: .039 inch, minimum.
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Insertion force: 2 pounds, maximum.
Withdrawal force test:
Steel test pin diameter: .037 inch, maximum.
Test pin finish: 16 microinches.
Insertion depth: .093 inch, minimum.
Withdrawal force: 2 ounces, minimum.
Outer contact:
Test ring I.D.: .319 inch, maximum.
Test ring finish: 16 microinches.
Insertion force: 5 pounds, maximum when inserted a minimum of .093 inch.
Contact with slotted members: Shall contact a .324 inch minimum diameter ring
within .031 of their tip ends.
Permeability: Applicable.
Hermetic seal: Not applicable.
Leakage: Not applicable.
9
Insulation resistance: 5 x 10 ohms, minimum.
Contact insulator captivation: Applicable; torque shall be 1 inch-pound.
Salt spray (corrosion): Applicable.
Connector durability: Applicable.
Contact resistance (milliohms, maximum):
Initial
After environment
Inner conductor contacts:
3.0
4.2
Outer conductor contacts:
.4
Not applicable
Braid to body
.2
Not applicable
Dielectric withstanding voltage: 1,500 V rms, minimum, at sea level.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business