MIL-DTL-55302/143C
REQUIREMENTS:
Dimensions and configurations: See figures 1 through 5.
Contact identification: See figure 3.
Contact retention: 4 pounds minimum for each contact.
Contact engagement: 0.7 ounce minimum, 3.6 ounces maximum.
Contact separation: 0.5 ounce minimum.
Measured using test pins and procedures defined in MIL-DTL-55302/142.
Contact resistance: Shall not exceed 12 milliohms.
Dielectric withstanding voltage:
Sea level: 1,000 V rms, 60 Hz.
High altitude: 300 V rms, 60 Hz.
Current rating, maximum: 3.0 amperes.
Keying socket: Two hexagonal keyed guides provide 36 polarizing positions. Keys are constructed in
accordance with M55302/154. Connectors are supplied with hex pins in the "1" and "A" positions,
except for 1/4-turn locking styles, which are keyed in "F" and "6" positions. When required, connectors
can be easily keyed to the desired position by using a standard wrench or screwdriver.
Crimping tools (for subparts 4 and 6):
Basic tool: M22520/2-01.
Positioner: M22520/2-36.
Hood types: See MIL-DTL-55302/155.
Mounting hardware: See MIL-DTL-55302/154.
Mating connectors: Shall conform to MIL-DTL-55302/141.
Oversize pin exclusion test: Not applicable.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business