MIL-DTL-55302/152C
REQUIREMENTS
Dimensions and configurations: See figures 1 through 6.
Contact identification: See figure 4.
Contact retention: Coaxial and power: 11.25 pounds minimum.
Signal: 4 pounds minimum.
Power
Signal
Coaxial
Mating and unmating force (per contact):
(Min)
7.2 ounces
3.6 ounces
0.7 ounce
(Max)
36 ounces
18 ounces
3.6 ounces
Values for each connector to be addition of contacts according to contact type.
Contact separation:
Signal: 0.5 ounce minimum using test pins as specified in MIL-DTL-55302/142.
Coaxial: 0.5 ounce minimum using test pins as specified in MIL-DTL-55302/149.
Power: 1.5 ounce minimum using test pins as specified in MIL-DTL-55302/149.
Contact resistance: 12 milliohms maximum.
Dielectric withstanding voltage:
Sea level: 1,000 V rms, 60 Hz.
High altitude: 300 V rms, 60 Hz.
Current rating:
Power contacts: 25 amperes at 25°C.
Coaxial contacts: .5 ampere at 25°C.
Signal contacts: 3 amperes at 25°C.
Keying: Moldings and mounting hardware provide 16 or 36 polarizing positions according to choice of
4 or 6 way capability. Keys are constructed in accordance with MIL-DTL-55302/154. Connectors are
supplied with hex pins in the "1" and "A" positions, except for 1/4-turn locking styles, which are keyed in
"F" and "6" positions. When required, connectors can be easily keyed to desired position by using a
simple wrench.
Hood types: As specified in MIL-DTL-55302/155.
Mounting hardware: As specified in MIL-DTL-55302/154.
Mating connectors: As specified in MIL-DTL-55302/147.
Oversize pin exclusion test: Not applicable.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business