MIL-DTL-55302/168C
TABLE III. Contact tail plating.
Indicator
Plating
1
Tin lead in accordance with SAE-AMS-P-81728, 50 to 70 percent
tin, .0001 minimum thick over copper plating in accordance with
SAE-AMS2418
2
Gold in accordance with ASTM B488, type II, code C,
class 0.51 over nickel in accordance with MIL-DTL-38999, appendix A
CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to
indicate where changes from previous issue were made. This was done as a convenience only and the
Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and
contractors are cautioned to evaluate the requirements of this document based on the entire content
irrespective of the marginal notations and relationship to the last previous issue.
Referenced documents. In addition to MIL-DTL-55302, this document references the following:
MIL-DTL-38999
MIL-DTL-55302/169
MIL-DTL-55302/170
ASTM B187/B187M
ASTM B272
ASTM B488
ASTM D5948
SAE-AMS2418
SAE-AMS-P-81728
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Air Force 85
DLA - CC
DLA CC
(Project 5935-2008-074)
Review activities:
Air Force 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.daps.dla.mil.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business