MIL-DTL-55302/59H
Inches
mm
Inches
mm
Inches
mm
Inches
mm
.001
0.03
.032
0.81
.110
2.79
.214
5.44
.002
0.05
.051
1.30
.120
3.05
.220
5.59
.005
0.13
.075
1.91
.125
3.18
.225
5.72
.006
0.15
.078
1.98
.130
3.30
.235
5.97
.008
0.20
.082
2.08
.135
3.43
.250
6.35
.010
0.25
.086
2.18
.140
3.56
.350
8.89
.020
0.51
.090
2.29
.150
3.81
.395
10.03
.025
0.64
.100
2.54
.172
4.37
.400
10.16
.028
0.71
.107
2.72
.190
4.83
.425
10.80
.030
0.76
.109
2.77
.200
5.08
Number
Dimensions
of
contacts
BSC
BSC
±.010
±.010
REF
REF
REF
A
B
C
D
E
F
G
90
2.475
2.700
5.650
5.150
2.200
2.100
.400
(62.87)
(68.58)
(143.51) (130.81) (55.88) (53.34)
(10.16)
100
2.725
2.950
6.150
5.650
2.400
2.400
.400
(69.22)
(74.93)
(156.21) (143.51) (60.95) (60.95)
(10.16)
120
3.225
3.450
7.150
6.650
2.900
2.900
.400
(81.92)
(87.63)
(181.61) (168.91) (73.66) (73.66)
(10.16)
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm).
4. These connectors mate with connectors specified in MIL-DTL-55302/60.
5. Numbers indicating the first and last position in each row and every fourth contact position in between shall be
marked on the side(s) of the connector. As and option to the above, numbers indicating every fourth cavity
may be stamped on the side of the connector, with the exception that the number one contact shall be
marked.
6. Termination layout on .020 (0.51 mm) modular grid.
7. Metric equivalents are in parentheses.
8. Optional undercut .050 (1.27 mm) maximum, on PCB side for cleaning purposes.
9. Position of the hex orientation is optional. Hex shall not break through the side of the insulator.
10. Hole depth to female guide hardware is .282 min (7.16 mm). Full thread depth to female threaded hardware
is .240 min (6.1 mm).
FIGURE 1. Connectors, plug, .100 (2.54 mm) spacing - Continued.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business