MIL-DTL-55302/84C
REQUIREMENTS
Dimensions and configuration: See figure 1.
Material:
Crimp, removable: 01 - Phosphor bronze in accordance with ASTM B134.
02 - Beryllium copper in accordance with ASTM B196.
Dip solder tail:
03
Solder eyelet:
04 - Phosphor bronze in accordance with ASTM B134.
Wrappost:
05
06
Contact sleeve: Stainless steel in accordance with ASTM A240. All contact sleeves are passivated except -01
which has a gold flash.
Plating: Contact finish in accordance with ASTM B488, type 2, code C, class 1.27, over copper plate.
Qualification and quality conformance requirements are not applicable. All contacts are tested in accordance with the
applicable specification sheet. All contacts are supplied with MIL-DTL-55302/82 and cannot be acquired separately.
Part or Identifying Number (PIN): M55302/84-(dash number from figure I).
Reference documents. In addition to MIL-DTL-55302, this document references the following:
MIL-DTL-55302/82
ASTM A240
ASTM B134
ASTM B196
ASTM B488
Previous changes. Marginal notations are not used in this revision to identify changes with respect to the previous
issue due to the extent of the changes.
CONCLUDING MATERIAL
Custodians:
Preparing activity:
Air Force 11
DLA - CC
DLA CC
(Project 5935-4440-006)
Review activities:
Air Force 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above using the
ASSIST Online database at https://assist.daps.dla.mil.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business