MIL-DTL-83503/6D
REQUIREMENTS:
Design and construction:
Dimensions and configurations: See figure 1.
Interface: Round conductor flat cable, .050 inch (1.27 mm) centers, to dual-in-line socket .100 X .300 inch (2.54 X 7.62),
.100 X .400 inch (2.54 X .10.16 mm) or .100 X .600 inch (2.54 X 15.24 mm).
Temperature range: -55 C to +120 C.
Voltage rating: 300 V rms.
Current rating: 1 ampere.
Materials:
Contacts: Beryllium copper in accordance with ASTM B196 or ASTM B197, phosphor bronze in accordance with ASTM
B139, or other equivalent industry standard. Gold plating shall be in the contact mating area.
Accessories: May be made of 301 stainless steel or other approved equivalent material.
Housing: Glass filled nylon in accordance with ASTM D4066, Diallylphthalate, type SDG-F in accordance; glass filled
polyester in accordance with ASTM D5948 or equivalent industry standard.
Conductor accommodation: 28 AWG stranded .05 inc spacing between conductor centerlines.
h
Test wire size: 28 AWG stranded.
Assembly tool: Connector manufacturers commercial tool.
Dielectric withstanding voltage:
(at sea level): 500 V rms.
(at altitude): 200 V rms.
Contact resistance: 50 milliohms, maximum.
Humidity: Connector shall be mated with the appropriate series 2 (low profile) dip socket in accordance with MIL-S-83734
with long axis of contacts running in a horizontal direction and the cable hanging down vertically.
Polarization: Not required.
Marking:
Contact identification: As a minimum, mark the end contacts in each row with raised numbers or ink stamps on connector
cover.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business