MIL-DTL-83538/8C
mm
Inches
mm
Inches
mm
Inches
mm
Inches
mm
Inches
0.102
0.004
2.57
0.101
5.72
0.225
32.39
1.275
36.27
1.428
.20
0.008
2.80
0.110
6.22
0.245
32.49
1.279
36.37
1.432
.31
0.012
3.05
0.120
6.48
0.255
33.40
1.315
37.45
1.356
1.00
0.034
3.95
0.155
7.58
0.298
33.50
1.319
37.55
1.478
1.19
0.047
4.05
0.159
7.68
0.302
33.55
1.320
37.64
1.482
1.35
0.053
4.01
0.019
14.18
0.558
33.65
1.325
37.76
1.487
2.03
0.080
4.12
0.162
14.28
0.562
34.39
1.354
38.35
1.510
2.41
0.095
4.70
0.185
25.4
1.00
34.49
1.358
38.46
1.514
2.50
0.098
NOTES:
1. Dimensions are in millimeters.
2. Inch equivalents are given for information only.
3. The dimension 5.72 - 4.70 indicates the location of the coupling nut when it is pushed toward
the rear.
FIGURE 1. Protective cover launcher receptacle - Continued.
REQUIREMENTS:
Dimensions and configurations: See figure 1.
This protective store cover is used with MIL-DTL-83538/4.
Part or Identifying Number (PIN) example: M83538/8-1.
MIL-DTL-83538/12 is utilized as a tool to mate and unmate the MIL-DTL-83538/8 protective cover to the
MIL-DTL-83538/4 receptacle.
QUALIFICATION: Protective covers shall be in accordance with the qualification requirements of
MIL-DTL-83538. The following details and exceptions shall apply:
Group A: Visual and mechanical examination (100% inspection).
Group B: Not applicable.
Qualification and group C: Two MIL-DTL-83538/8 protective covers and two MIL-DTL-83538/4
mating connectors shall be required for stand alone qualification. However, for group C and for a
manufacturer that is in the process of qualifying MIL-DTL-83538/4 connectors concurrently with
the protective cover, then one protective cover and one mating connector shall be required for
testing.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business