MIL-DTL-83723/27B
Fluid
Specification
MIL-PRF-5606
Hydraulic fluid, petroleum base
MIL-DTL-5624
JP- 4 fuel
MIL-PRF-7808
Lubricating oil
MIL-PRF-23699
Lubricating oil
SAE-AMS1424
Deicing fluid
PERFORMANCE:
Temperature life
Three straight and three 90° angle boots of each material (type A and type B) shall be installed on a
connector and exposed to rated temperature (type A: 150°C) (type B: 200°C) for 1000 hours. At the
end of this time, they shall be cooled to room temperature and the pull-off tests shown on figure 5
shall be performed. The minimum force required to pull boot from connector at any angle shall be 25
pounds.
FIGURE 5. Pull-off test method.
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business