INCH-POUND
MIL-PRF-39012E
27 April 2005
SUPERSEDING
MIL-PRF-39012D
13 July 1995
PERFORMANCE SPECIFICATION
CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements and tests for radio frequency
connectors used with flexible RF cables and certain other types of coaxial transmission lines.
1.2 Classification. Connectors are of the following classes, categories, and Part or Identifying
Number (PIN), as specified (see 3.1).
1.2.1 Class. The class of connectors consists of the following:
a. Class 1 - A class 1 connector is a connector which is intended to provide superior RF
performance at specified frequencies, and for which all RF characteristics are completely
defined.
b. Class 2 - A class 2 connector is intended to provide mechanical connection within an RF circuit
providing specified RF performance.
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Columbus, ATTN: VAI, P. O. Box 3990, Columbus OH 43218-3990 or by email to
RFConnectors@dla.mil . Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business