MIL-PRF-49142/11D
ENGINEERING DATA:
Nominal impedance: Non-constant.
Frequency range: 0 to 500 MHz minimum.
Voltage rating: 400 V rms maximum working voltage at sea level. 100 V rms maximum working
voltage at 70,000 feet (4.437 kPa).
Temperature range: -65°C to +165°C.
REQUIREMENTS:
Dimensions and configuration: See figure 1 and MIL-STD-348.
Force to engage and disengage:
Longitudinal force: Not applicable.
Torque: 2.5 inch-pounds (0.28 Nm) maximum.
Coupling proof torque: Not applicable.
Inspection conditions: Coupling torque: 4 to 6 inch-pounds (0.45 Nm to 0.68 Nm).
Mating characteristics: See MIL-STD-348 for dimensions.
Center contact (socket):
Oversize test pin: 0.040 inch (1.02 mm) diameter minimum (nonclosed entry contacts only).
Insertion depth: .125 inch (3.17 mm) minimum.
Number of insertions: 1.
Insertion force test:
Steel test pin finish: 16 microinches (0.406 µm).
Insertion force: 2 pounds (0.56 N) maximum.
Steel test pin diameter: .039 inch (0.99 mm) minimum +.001 inch (0.02 mm).
Withdrawal force test:
Steel test pin diameter: .037 inch (0.94 mm) maximum -.001 inch (0.02 mm).
Withdrawal force: 2 ounces (0.56 N) minimum.
Test pin finish: 16 microinches (0.406 µm).
Permeability: Applicable.
Hermetic seal: Not applicable.
Leakage: Not applicable.
Insulation resistance: 5,000 megohms.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business