MIL-PRF-55339/1B
Durability: 500 cycles minimum at 12 cycles/minimum, maximum. The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding voltage: Method 301 of MIL-STD-202.
Test voltage: 1,500 V rms, max, at sea level.
Contact resistance (in milliohms, max):
After environment
Initial
Center contact
2.0
2.5
Outer contact
0.2
0.2
Outer contact (-70001)
0.4
0.4
Vibration, high frequency: Method 204 of MIL-STD-202, test condition B.
Shock (specified pulse): Method 213 of MIL-STD-202, test condition B.
Thermal shock: Method 107 of MIL-STD-202, test condition B.
Moisture resistance: Method 106 of MIL-STD-202, 200 megohms, min.
Corona level: 375 V rms, min.
Altitude: 70,000 feet (4.437 kPa).
RF high potential withstanding voltage:
RF voltage 1,000 V rms.
Frequency 5 MHz.
Salt spray (corrosion): Method 101 of MIL-STD-202, test condition B.
Coupling mechanism retention force: Not applicable.
Part or Identifying Number (PIN): M55339/01-00001 or M55339/01-70001.
PIN: M55339/01-70001. CAUTION: THIS PART HAS A NICKEL PLATED BODY AND IS NOT FOR
USE IN APPLICATIONS WHERE PASSIVE INTERMODULATION GENERATION (PIM) MAY BE A
CONCERN.
Marginal notations are not used in this revision to identify changes with respect to the previous issue due
to the extent of the changes.
Referenced documents. In addition to MIL-PRF-55339, this document references the following:
MIL-STD-202
MIL-STD-348
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business