MIL-PRF-55339/13B
Minimum test pin (withdrawal force):
Steel test pin diameter: .052 inch (1.32 mm), maximum.
Pin finish: 16 microinches (0.406 µm).
Withdrawal force: 2 oz (0.56 N), minimum.
Number of withdrawals: 1.
Outer contact: Not applicable.
Permeability: <2.0
Seal:
- 00001 1/ or -70002
- 00492 or -70001
1 x 10-7 atm cm3/sec (center contact to body)
Hermetic:
Not applicable
Pressurized:
Not applicable
30 psi (206.8 kPa), maximum
Weatherproof:
30 psi (206.8 kPa), maximum (mounting seal)
30 psi (206.8 kPa), maximum
(mounting seal)
Insulation resistance: 5,000 megohms, minimum.
VSWR: 1.40:1, maximum for hermetic and 1 25:1 maximum for non-hermetic at .5 to 4 GHz.
RF leakage (total): -55 dB, minimum, 2 to 3 GHz.
RF insertion loss: 0.5 dB maximum for hermetic and 0.2 dB maximum for non-hermetic, 3 GHz
(.144 √F (GHz) dB maximum tested at 3 GHz).
Durability 500 cycles minimum at 12 cycles/minimum maximum The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding:
Test voltage: 1,500 Vrms, minimum (sea level).
Contact resistance (milliohms, maximum).
Contact
Hermetic (-00492, -70001)
Non-hermetic (-00001, -70002)
After
Initial
After
Initial
Center
4.4
4.9
1.5
2.0
Outer
0.2
N/A
0.2
N/A
Outer (-70001)
0.4
N/A
(-70002) 0.4
N/A
_____
1/ Internal parts shall be constructed of nonferro-magnetic material.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business