MIL-PRF-55339/14A
Minimum test pin (withdrawal force):
Steel test pin diameter: .052 inch (1.32 mm), maximum.
Pin finish: 16 microinches (.406 µm).
Withdrawal force: 2 oz (0.56 N), minimum.
Number of withdrawals: 1.
Outer contact:
Minimum test ring ID: .391 inch (9.93 mm), maximum.
Ring finish: 16 microinches (.406 µm).
Insertion force: 5 lb (22.24 N), maximum.
Insertion depth: .093 inch (2.36 mm), minimum.
Number of insertions: Not applicable.
Maximum test ring ID: .324 inch (8.25 mm), minimum.
Test ring finish: Not applicable.
Insertion depth: .031 inch (0.79 mm), maximum.
Number of insertions: Not applicable.
Permeability: <2.0
Seal:
Hermetic: Not applicable.
Pressurized: Not applicable.
Weatherproof: Not applicable.
Insulation resistance: 5,000 megohms, minimum.
VSWR: 1.30:1, maximum .5 to 4 GHz.
RF leakage (total): Not applicable.
RF insertion loss: .25 dB, maximum, 3 GHz (.144 √F (GHz) dB maximum tested at 3 GHz)
Durability: 500 cycles minimum at 12 cycles/minimum maximum. The connector shall meet the mating
characteristics and force to engage and disengage requirements.
Dielectric withstanding: Test voltage: 1,500 Vrms, minimum (sea level).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business