MIL-PRF-55339/6B
Design and construction:
Dimensions and configurations: See figure 1 and MIL-STD-348.
Impedance: 50 ohms, nominal.
Working voltage:
Sea level: 1,000 V rms.
70,000 feet (4.437 kPa): 250 V rms.
Frequency range: Not applicable.
Temperature range: -65º to +165ºC.
PERFORMANCE REQUIREMENTS (installation torque of 6 to 10 inch-pounds (0.68 to 1.13 Nm))
Center contact retention:
Axial force: 6 pounds (26.69 N) minimum.
Torque: 4 inch-ounces (0.03 Nm), minimum.
Force to engage and disengage:
Longitudinal force: Not applicable.
Torque: 6 inch-pounds (0.68 Nm), maximum.
Coupling proof torque: Not applicable.
Mating characteristics:
Center contact (socket):
Oversize test pin diameter: .074 inch (1.88 mm), minimum.
Insertion depth: .125 inch (3.18 mm), minimum.
Number of insertions: 1.
Maximum test pin (insertion force test):
Steel test pin diameter: .066 inch (1.68 mm), minimum.
Pin finish: 16 microinches (0.41 µm).
Insertion force: 2 pounds (8.89 N), maximum.
Number of insertions: 1.
Minimum test pin (withdrawal force):
Steel test pin diameter: .063 inch (1.60 mm), maximum.
Pin finish: 16 microinches (0.41 µm).
Withdrawal force: 2 ounces (0.56 N), minimum.
Number of withdrawals: 1.
Outer contact:
Minimum test ring inner diameter: .316 in. (8.03 mm), maximum.
Ring finish: 16 microinches (0.41 µm).
Insertion force: 25 pounds (111.2 N), maximum.
Insertion depth: .093 inch (2.63 mm), minimum.
Number of insertions: 1.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business