INCH-POUND MS18193F
5 January 2011
SUPERSEDING MS18193E
26 April 1990
DETAIL SPECIFICATION SHEET
SHEILD, ELECTRICAL CONNECTORS FOR
66 AND 104 CONTACT CONNECTORS
Reinstated after 10 July 2009 and may be used for new and existing designs and acquisitions.
This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and
MIL-DTL-28748.
T THREAD CL 4 HOLES
CLAMP SHAPE OPTIONAL MAY
BE ATTACHED TO SIDE OF SHIELD
CL
(SEE
NOTE 8)
G DIA. 2 HOLES
(FOR USE WITH LONG JACKSCREWS)
.62 MAX.
CL D B CL
SIDE S
TOP T
F (SEE NOTE 6)
E
SEE NOTE 9
A
.087
±.020
C
.62 MAX.
C
X
CORROSION RESISTANT, SPACER WASHER (4) TOTAL .087 INCH THICK,
FOR EACH MOUNTING HOLE (SEE NOTE 7)
Shield designator |
Shield and shield clamp location (see note 8) |
U ±.003 (0.08) |
v +.005 (0.13 mm) -.001 (0.03 mm) |
W Min |
Connector size (number of contacts) |
MS18193-T3 MS18193-S3 |
top opening side opening |
.109 (2.77) |
.120 (3.05) |
.062 (1.57) |
66 |
MS18193-T4 MS18193-S4 |
top opening side opening |
.133 (3.38) |
.150 (3.81) |
.110 (2.79) |
104 |
FIGURE 1. Shield for 66 and 104 contact positions.
AMSC N/A FSC 5935
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business