MS18193F
Shield designator |
Shield and shield clamp location |
Connector size (number of contacts) |
A ±.03 (0.76 mm) |
8 ± .016 (0.41 mm) |
C ± .016 (0.41 mm) |
D ±.005 (0.13 mm) |
E ±.005 (0.13 mm) |
F Minimum cable opening sq. inch |
G +.003 (0.08 mm) -.001 (0.03 mm) |
T thread |
x max |
|
MS18193-T1 MS18193-S1 |
top opening side opening |
66 |
1.17 (29.72) |
2.366 (60.10) |
1.211 (30.76) |
1.969 (50.01) |
.500 (12.70) |
.55 (13.97) |
.196 (4.98) |
.112-40 UNC-28 |
1.37 (34.80) |
|
MS18193-T2 MS18193-S2 |
top opening side opening |
104 |
2.23 (56.64) |
2.835 (72.01) |
1.625 (41.28) |
2.375 (60.33) |
.875 (22.23) |
1.10 (27.94) |
.229 (5.82) |
.138-32 UNC-28 |
1.88 (47.75) |
|
MS18193-T3 MS18193-S3 |
top opening side opening |
66 |
1.17 (29.72) |
2.366 (60.10) |
1.211 (30.76) |
1.969 (50.01) |
.500 (12.70) |
.55 (13.97) |
.196 (4.98) |
.112-40 UNC-28 |
1.37 (34.80) |
|
MS18193-T4 MS18193-S4 |
top opening side opening |
104 |
2.23 (56.64) |
2.835 (72.01) |
1.625 (41.28) |
2.375 (60.33) |
.875 (22.23) |
1.10 (27.94) |
.229 (5.82) |
.138-32 UNC-28 |
1.88 (47.75) |
|
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ±.016 inch (0.41 mm).
4. Material aluminum alloy in accordance with SAE-AMS4016 temper H32 .040 inch (1.02 mm) thick.
5. Finish anodized in accordance with MIL-A-8625, type I or type II.
6. Edges of cable entry hole to be rounded to prevent insulation chafing.
7. Spacer washers (4) used only with shell. Discard otherwise. Aluminum shall be in accordance with
SAE-AMS4027, T6, anodized in accordance with MIL-A-8625, type I or II.
8. MS18193-T3, S3, T4, S4 are for use with one-piece jackscrews.
9. No crack, chips, or sharp edges on all 4 edges of flange.
FIGURE 1. Shields for 66 and 104 contact positions - Continued.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business