MS24266N
Inches |
mm |
.004 |
.10 |
.005 |
.13 |
.082 |
2.08 |
.087 |
2.21 |
.093 |
2.36 |
.107 |
2.71 |
.125 |
3.18 |
.177 |
4.50 |
.188 |
4.78 |
.316 |
8.03 |
.330 |
8.38 |
.366 |
9.30 |
.383 |
9.73 |
.552 |
14.02 |
NOTES:
1. Dimensions are in inches. Unless otherwise specified, tolerance on decimals is ± .005.
2. Metric equivalents are given for information only.
3. All diameters to be concentric with each other within .015 T.I.R.
4. All diameters in the same plane to be concentric with each other with .004 T.I.R.
5. Distance between end of shell and the point at which a gauge pin having the same basic diameter as the mating contact and a square face, engages socket contact spring.
6. Dimensions on pin and socket contact locations and end of shell to insert faces apply when contacts are placed in inserts for inspection or application.
7. Dimension .071 may reduce to .056 minimum under pressures caused by molded cable assemblies or sharp cable bends.
8. Use tool MIL-I-81969/17 to assemble contacts into this connector, and use tool MIL-I-81969/19 to remove contacts from this connector.
9. Thread relief groove is optional on shell. When groove is omitted the length of full thread from front of shell will be .221 minimum.
10. Environment resistant (classes F and R) plugs, type B aluminum shell material. Grounding environment resistant (class G) plugs, types B-aluminum shell material. Environment resistant (class E) plugs, types B-stainless steel shell material.
11. True position (T.P.) tolerances specified are for maximum material conditions (M.M.C.).
FIGURE 3. Plug, bayonet for classes F, G and R - Continued.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business