MS27144C
Inches |
mm |
Inches |
mm |
.002 |
.05 |
.152 |
3.86 |
.003 |
.07 |
.160 |
4.06 |
.010 |
.25 |
.245 |
6.22 |
.015 |
.38 |
.494 |
12.55 |
.045 |
1.10 |
.690 |
17.50 |
.125 |
3.18 |
1.390 |
35.30 |
.130 |
3.30 |
MS dash no. |
Reference drawing no. (assembly) |
Style |
Size |
Wire gage |
Shell number |
Terminal number |
Sleeve number |
Cable dia |
Cable MIL-DTL-13486 PIN |
-1 |
8338560 |
1 |
1 |
14 |
8338561 |
8338564 OR 7982997 |
8338562 |
.160±.010 |
M13486/1-5 |
-2 |
None |
1 |
2 |
16 |
8724494 |
.130±.015 |
M13486/1-3 |
||
-3 |
7982398 |
2 |
1 |
14 |
7982401 |
.160±.010 |
M13486/1-5 |
FIGURE 1. Configuration and dimensions - Continued.
REQUIREMENTS: Material:
Shell: Rubber in accordance with ASTM D2000, M3BC610A14C12EO34F19.
Terminal: Brass composition, temper half hard minimum in accordance with ASTM B 36/B 36M, ASTM B 121/B 121M or ASTM B124/B 124M.
Terminal protective finish: Silver plate, grade D, class S, .0002-inch minimum thickness in accordance with ASTM B700.
Mating connectors:
Style 1 size 1 mates with connector MS33800 and MS27142, size 2. Style 1 size 2 mates with connector MS33800 and MS27142, size 3.
Style 2 size 1 to be used only with ribbed receptacle MS33800, style II to denote polarity.
When connectors are coupled, the following requirements shall apply:
Voltage drop: The voltage drop shall not exceed 20 millivolts and shall meet the requirements outlined in MIL-STD-202, method 307.
Dielectric strength: The assembly shall withstand dielectric strength test of 1000 volts, and meet the requirements of MIL-STD-202, method 302.
Waterproof requirements: The assembly shall be waterproof. Refer to MIL-HDBK-1184, or equivalent, for guidance on waterproof testing.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business