MS27144C
Salt spray corrosion test: The assembly shall meet the requirements of salt spray corrosion test outlined in MIL-STD-202, method 101 (5% saline solution, 200 hours duration).
Pull test: Terminal number 8338564 to be crimped to cable. Terminal number 7982997 to be soldered to cable with solder composition SN-50 or SN-60, in accordance with J-STD-004, J-STD-005, and J-STD-
006. The terminal shall withstand a pull test of 40 pounds (18 kilograms) for style 1 size 2, or 60 pounds
(27 kilograms) for style 1 size 1, and style 2 size 1.
Separation force: The force required to uncouple the connectors shall not exceed 50 percent of the values expressed in the pull test above when tested at -55°C and at 85°C.
Part or Identifying Number (PIN): MS27144- (dash number as shown on figure 1).
Reference drawings may be obtained from the U.S. Army Tank Automotive Command, Warren, MI.,
48397-5000.
(Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.)
CONCLUDING MATERIAL
Custodians: Preparing activity: Army - AT DLA - CC
Air Force - 11
Navy - MC (Project 5935-4427-003) DLA - CC
Review activities: Army - CR, CR4
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business