MS27501H
Inches |
mm |
Inches |
mm |
Inches |
mm |
Inches |
mm |
.001 |
0.03 |
.567 |
14.40 |
1.075 |
27.2 |
1.57 |
39.9 |
.005 |
0.13 |
.572 |
14.53 |
1.100 |
27.94 |
1.582 |
40.18 |
.010 |
0.25 |
.58 |
14.7 |
1.16 |
29.5 |
1.69 |
42.9 |
.015 |
0.38 |
.700 |
17.78 |
1.19 |
30.2 |
1.82 |
46.2 |
.047 |
1.19 |
.82 |
20.8 |
1.207 |
30.66 |
3.0 |
76.0 |
.063 |
1.60 |
.850 |
21.59 |
1.32 |
33.5 |
3.5 |
89.0 |
.167 |
4.24 |
.9 |
22.9 |
1.332 |
33.83 |
4.0 |
102.0 |
.250 |
6.35 |
.94 |
23.9 |
1.44 |
36.6 |
5.0 |
127.0 |
.500 |
12.70 |
.975 |
24.76 |
1.457 |
37.01 |
6.0 |
152.0 |
7.0 |
178.0 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Finish: See MIL-DTL-38999.
4. BSC dimensions apply at Maximum Material Condition (MMC).
5. The gauge features for GG shall be .004 inches (0.10 mm) smaller than MMC size at basic location.
6. Not for space born applications.
FIGURE 1. Cover - Continued.
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Interface dimensions shall conform to MIL-DTL-38999.
Material:
Cap - Impact extruded or machined aluminum alloy. Disk - Silicone or fluorosilicone elastomer.
Chain - Stainless steel, passivated, conforming to RR-C-271, type II, class 3. Fastener - Stainless steel, passivated.
Mating connectors: MIL-DTL-38999 series I, and MIL-DTL-27599 series I. Disk shall be bonded to cover, or mechanically retained.
Chain shall rotate freely on fastener.
The protective cover and chain assembly shall withstand a static tensile load of 35 pounds applied along the B reference line for 5 minutes.
Fastener tensile strength: Both axial and longitudinal directions shall be 25 pounds. The load shall be applied to the end of the chain.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business