MS27510H
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Interface dimensions shall be in accordance with MIL-DTL-38999.
Material:
Cap - Impact extruded or machined aluminum alloy. Disk - Silicone or fluorosilicone elastomer.
Chain - Stainless steel, passivated, conforming to RR-C-271, type II, class 3. Fastener - Stainless steel, passivated.
Mating connectors: MIL-DTL-38999, series II plugs and MIL-DTL-27599, series II plugs.
The protective cover and chain assembly shall withstand a static tensile load of 35 pounds applied along the B reference line for 5 minutes.
Fastener tensile strength: Both axial and longitudinal directions shall be 25 pounds. The load shall be applied to the end of the chain.
Qualification:
Examination of product. Mating and unmating forces. Humidity.
Salt spray (corrosion).
Fastener tensile strength (see requirement). Altitude immersion.
Group A sampling inspection. 100% inspection is not applicable. Sampling inspection shall be in accordance with table I:
TABLE I. Group A sampling plan.
Lot size |
Sample size |
1 to 13 14 to 150 151 to 280 281 to 500 501 to 1,200 1,201 to 3,200 |
100 percent 13 units 20 units 29 units 34 units 42 units |
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business