MS27615F
REQUIREMENTS
Dimensions and configurations: See figure 1.
Connector mating: This connector mates with MS24264, MS24265, MS27034, MS27613 and
MS27614.
The contacts shall be crimp type contacts and shall conform to SAE-AS39029.
Contacts are not assembled into the connectors, but are furnished separately in containers. The contacts shall be crimped with a tool conforming to MIL-C-22520/1 crimping tool.
For insert arrangements and alternate insert (keying) positions. See MIL-STD-1554.
The dimensions and weight requirements shall be as specified in the tables shown on the MS drawings.
Dust caps are supplied for front and back end of the connectors.
When Part or Identifying Number (PIN) designates a cable support, the connector and cable support will be furnished unassembled.
Material and finishes:
a. The shells shall be of stainless steel material. Type 300 series in accordance with
DOD-F-24669/6 and shall be passivated in accordance with MIL-STD-171.
b. The contacts shall be of telnic bronze and shall be rhodium plated in accordance with
SAE-AS39029 .
c. The rigid insulation shall be of fired aluminum oxide (ceramic) material.
d. Cable supports shall be of 310 stainless steel, casting alloy and shall be passivated in accordance with MIL-STD-171.
e. Contact retainers: Material optional.
f. Seals and grommets shall be of silicone rubber.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business