MS3185B
NOTES:
1. Dimensions are in inches. Metric equivalents are given for information only.
2. Thread relief must be larger than one full thread to allow potting compound to fill thread relief when boot is bottomed on mating connector accessory thread.
3. When separate metal threaded ring is provided, ring shall be .125 minimum thick having an interference fit with the boot. The separate metal ring shall be mandatory on the 75-90 degree elbow.
4. Entrance configuration optional with indicated cross-sectional area.
Elbow mold |
|||||||||
|
Size |
Part number |
VV class 2B thread |
A min cross-sec area ( in2 ) |
B max |
c min perf thd |
L 75-90 deg max |
x dia min ID |
y dia max OD |
z dia min ID |
8 |
MS3185-8-2 |
7/16-28 |
.078 |
1.030 |
.199 |
1.125 |
.317 |
.608 |
.386 |
10 |
MS3185-10-2 |
9/16-24 |
.147 |
1.125 |
1.250 |
.433 |
.734 |
.503 |
|
12 |
MS3185-12-2 |
11/16-24 |
.190 |
1.250 |
1.344 |
.548 |
.858 |
.628 |
|
14 |
MS3185-14-2 |
13/16-20 |
.226 |
1.297 |
1.453 |
.673 |
.984 |
.733 |
|
16 |
MS3185-16-2 |
15/16-20 |
.304 |
1.375 |
1.516 |
.798 |
1.110 |
.868 |
|
18 |
MS3185-18-2 |
1-1/16-18 |
.532 |
1.469 |
1.594 |
.899 |
1.234 |
.985 |
|
20 |
MS3185-20-2 |
1-3/16-18 |
.619 |
1.700 |
.287 |
1.750 |
1.024 |
1.360 |
1.110 |
22 |
MS3185-22-2 |
1-5/16-18 |
.690 |
1.703 |
1.828 |
1.149 |
1.484 |
1.235 |
|
24 |
MS3185-24-2 |
1-7/16-18 |
.806 |
2.100 |
.199 |
2.125 |
1.274 |
1.610 |
1.362 |
FIGURE 2. Mold, potting, elbow, 75-90 degrees.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business