MS3475 Connectors, Plug, Electrical, Rfi Shielded, Series 2, Crimp Type, Bayonet Coupling, Classes D, L, T, W And Z

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8

MS3475F

TABLE I.   Contact cavities requiring reduced diameters (XX) for pins and sockets in outer row of contact cavities.  1/

1/  The reduced diameter "XX" refers to the diameters of the raised seal barriers (pin barrier rings) or

lead-in chamfers (socket entry holes) to ensure proper sealing of pin and socket after mating.  See MIL-DTL-26482, connector intermateability control dimensions figure (series 1 and series 2) for reduced diameter "XX" for contact size 20 only.

REQUIREMENTS:

Dimensions and configuration:  See figure 1 and in table I.

Connector mating:  This connector mates with MS3470, MS3471, MS3472, MS3473, MS3474, MS3477 and MS3479.

Also, they will mate with MS3115 (dummy stowage receptacle) and the following series 1 receptacles provided both mating connectors contain a full compliment of power contacts:  MS3100, MS3112, MS3113, MS3114, MS3119, MS3120, MS3122, MS3124, MS3127 and MS3128.

Intermateability and rear accessory interchangeability dimensions are in accordance with

MIL-DTL-26482.

Class E is cancelled and replaced by class L.

This specification sheet supersedes MIL-C-83723/42 and MIL-C-83723/43. For insert arrangement, see MIL-STD-1669.

Insert arrangements requiring reduced diameters for raised seal barriers or lead-in chamfers on outer row of contact cavities as indicated, see table 1.

Connector identification marking shall be in accordance with MIL-DTL-26482.  Example:  MS3475L----, minimum height does not apply to shell sizes 8, 10 and 12.

Part or Identifying Number (PIN) example:

MS3475        L            24     -      61              P               W

MS number

Class

Shell size

Insert arrangement

Contact style

Alternate insert position

7