MS3476F
TABLE I. Contact cavities requiring reduced diameters (XX) for pins and sockets in outer row of contact cavities. 1/
Shell size |
Insert arrangement |
Contact Cavities |
8 |
-33 & -98 |
A, B, C |
12 |
-10 |
C, G |
14 |
-12 |
A, B, C, D, E, F, G, H |
14 |
-18 |
A, C, E, G, J, L |
14 |
-19 |
B, D, F, H, K, M |
16 |
-26 |
A, B, C, D, E, F, G, H, J, K, L, M, N, P, R |
18 |
-32 |
A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T |
22 |
-41 |
A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T, U, V, W, X, Y |
1/ The reduced diameter "XX" refers to the diameters of the raised seal barriers (pin barrier rings) or
lead- in chamfers (socket entry holes) to ensure proper sealing of pin and socket after mating. See MIL-DTL-26482, connector intermateability control dimensions (series 1 and series 2) figure for reduced diameter "XX" for contact size 20 only.
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table I.
Connector mating: This connector mates with MS3470, MS3471, MS3472, MS3473, MS3474, MS3477 and MS3479.
Also, they will mate with MS3115 (dummy stowage receptacle) and with the following series 1 receptacles, provided both mating connectors contain a full compliment of power contacts: MS3100, MS3112, MS3113, MS3114, MS3119, MS3120, MS3122, MS3124, MS3127 and MS3128. Intermateability and rear accessory interchangeability dimensions are in accordance with
MIL-DTL-26482.
Class E is cancelled and replaced by class L.
This specification sheet supersedes, MIL-C-83723/13 and MIL-C-83723/14. For insert arrangement, see MIL-STD-1669.
Insert arrangements requiring reduced diameters for raised seal barriers or lead-in chamfer on outer row of contact cavities as indicated, see table I.
Connector identification marking shall be in accordance with MIL-DTL-26482. Example: MS3476L----, minimum height does not apply to shell sizes 8, 10 and 12.
Part or Identifying Number (PIN) example:
MS3476 L 24 - 61 P W
MS number
Class
Shell size
Insert arrangement
Contact style
Alternate insert position
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business