MS35123C
NOTES:
1. Unless otherwise specified the tolerance shall be ±.003 (0.08 mm).
2. Metal stamp or etch characters to meet the requirements of MIL-STD-13231.
3. All threads shall be in accordance with FED-STD-H28.
4. Dimensions are in inches.
5. Metric equivalents are given for information only.
FIGURE 1. Type UG-700/U Connector - Continued.
Dimensions and configuration: In accordance with Figure 1 and the following drawings:
SC-B-72173 - Body, Brass.
SC-B-72196 - Clamp, Braid, Brass. SC-B-72197 - Nut, Clamp, Brass. SC-B-72199 - Insulator.
SC-B-72200 - Contact, Brass. MS25082 - Nut, Hex, Brass.
The insulator shall have no cracks or visible flaws.
All metal parts shall be free from chips, burrs, and scratches in accordance with best commercial practices.
Frequency range: 500 MHz, maximum. Voltage rating: 100 volts, peak, maximum.
Corrosion: Method 101 of MIL-STD-202 test condition B.
Finish: All metal parts shall be silver plated to a minimum thickness of 0.0002 inches (0.005 mm) in accordance with ASTM B700.
Part or Identifying Number (PIN): MS35123-1.
Referenced documents. In addition to MIL-DTL-27434, this document references the following: FED-STD-H28
MIL-STD-202
MIL-STD-13231
SC-B-72173
SC-B-72196
SC-B-72197
SC-B-72199
SC-B-72200
MS25082
ASTM B700
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business