MS75021 Connector, Receptacle, Electrical - 12 Contact, Intervehicular, 28 Volt, Waterproof

Pages 1 - 2 - 3

MS75021E

Termination designation	Circuit number	Connects to
A	24-484	LH blackout marker
B	22-461	LH service signal
C	24-483	RH blackout marker
D	90	Ground
E	21-489	Service clearance
F	23	Blackout stop
H	490	Blackout clearance
J	22-460	RH service signal
K	37	Auxiliary power
L	90	Ground
M	53	Brake
N	53	Brake

NOTES:

1. Dimension are in inches, metric equivalents are given for information only.

2. Circuit numbers are in accordance with typical wiring diagram Army drawing number 8377310.

3. Threads shall be in accordance with FED-STD-H28.

4. Details of this assembly shall be in accordance with drawings referenced herein and may be obtained online from www.tacom.army.mil or from US Army Tank Automotive Command, 6501 E.

11 Mile Rd. Warren, MI 48397-5000.

5. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle.

6. International standardization agreement implementation. This specification implements QSTAG 327 and STANAG 4007. When amendment, revision, or cancellation of this specification is proposed,

the preparing activity must coordinate the action with the U.S. National Point of Contact for the international standardization agreement, as identified in the ASSIST database at https://assist.dla.mil/.

FIGURE 1. Connector, plug, electrical, intervehicular - Continued.

Requirements:

Mating receptacle: These plugs mate with receptacles specified in MS75020.

This drawing illustrates final assembly. The parts to be shipped unassembled in bag. Electrical requirements shall be in accordance with Army drawing 10911317.

Marking shall consist of the MS Part or Identifying Number (PIN) and manufacturer identification in accordance with MIL-STD-130.