MIL-DTL-12883/47D
REQUIREMENTS:
Design and construction: See figures 1, 2, 4, 5, and table I.
Insulator: Diallyl phthalate, in accordance with ASTM D 5948, type SDG-F, or any glass filled
thermoplastic material in accordance with ASTM D 5204.
Color: Material color shall be optional providing that the color provides a contrasting background for
the blue sealing grommet or blue color bands indicating rear release contacts.
Grommet: Silicone rubber.
Mounting hardware: Corrosion resistant steel or steel with cadmium/chromate finish.
Electrical:
Insulation resistance: 1000 megohms minimum. Test pin diameter, size 16, .0625 ± .0010 inch
(1.595 ± 0.025 mm).
Dielectric withstanding voltage:
Sea level: Test voltage, 1500 V rms. Test pin diameter, size 16, .0625 ± 0.0010 inch
(1.595 ±0.025 mm).
High altitude 80,000 feet (24.4 km): Test voltage, 500 V rms. Test pin diameter, size 16,
.0625 ± 0.0010 inch (1.595 ± 0.025 mm). For purpose of this test an air pressure of 26 millibar
(2.6 kilopascals), will be used to simulate an altitude of 80,000 feet (24.4 km).
Contacts: Contacts shall be removable crimp type in accordance with MIL-C-39029/92, MIL-C-39029/5
(see table I).
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business